Compression Driver DE12 1.0 inch 25W 8Ohm B&C Speakers
- 50W continuous program power capacity
- 1" horn throat diameter
- 36mm ( 1.4 in) aluminium voice coil
- Polyester diaphragm
- 1500-18000Hz response
- 106 dB sensitivity
SPECIFICATIONS | |
Throat Diameter | 25 mm ( 1.0in) |
Nominal Impedance | 8 Ω ( Ohm ) |
Minimum Impedance | 7.8 Ω ( Ohm ) |
Nominal Power Handling | 25W |
Continuous Power Handling | 50W |
Sensitivity | 106 dB |
Frequency Range | 1.5 - 18.0 kHz |
Recommended Crossover | 2.2 kHz |
Voice Coil Diameter | 36mm ( 1.4 in ) |
Winding Material | Aluminium |
Inductance | 0.14 mH |
Diaphragm Material | Mylar |
Flux Density | 1.45 T |
Magnet Material | Ferrite |
MOUNTING AND SHIPPING INFO | |
Two M5 holes 180° on 76mm ( 3 in ) diameter | |
Overall Diameter | 90mm ( 3.5 in ) |
Depth | 49mm ( 2.0 in ) |
Net Weight | 1.0kg ( 2.2 lb ) |
Replacement Diaphragm | MMD0128 |
- Driver mounted on B&C ME 45 horn.
- 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- 12 dB/oct. or higher slope high-pass filter.
No posts found
Shipping
We ship Worldwide by Hellenic Post
Delivery time is 5-10 days, for Europe, 10-25 days, Worldwide.
The delivery cost is 25,00 EUR up to 2kg by post.
130,00 EUR up to 200kg by Truck. (only for Europe)