Digital Multimeter UNI-T PRO UT195E

Digital Multimeter UNI-T PRO UT195E

The UNI-T Uni-T UT195E meter is one of the universal measuring devices that allows you to measure basic electrical quantities, i.e. direct or alternating voltage, direct or alternating current, as well as resistance. Additionally, the model allows you to check the continuity of the circuit, test diodes, as well as measure capacity, frequency and fill factor.

The meter allows both manual and automatic change of measurement ranges. The device also allows for relative measurement and true RMS measurement. The meter also has the function of recording measurement values and freezing the last reading.

MEASURING RANGES
DC voltage: 600 mV / 6 V / 60 V / 600 V / 1000 V ±(0.5%+3)
AC voltage: 600 mV / 6 V / 60 V / 600 V / 750 V / LoZ 600 V ±(0.7%+3)
DC current: 600 µA / 6000 µA / 60 mA / 600 mA / 6 A / 20 A ±(0.8%+3)
AC current: 600 µA / 6000 µA / 60 mA / 600 mA / 6 A / 20 A ±(1%+3)
Resistance: 600 Ohm / 6 kOhm / 60 kOhm / 600 kOhm / 6 MOhm / 60 MOhm ±(0.8%+2)
Capacitance: 6 nF / 60 nF ~ 600 µF / 6 mF ~ 60 mF; ±(3%+5)
Frequency: 60 Hz ~ 10 MHz ±(0.1%+4)
Fill factor: 0.1%-99.9%
Diode test
Checking circuit continuity

ADDITIONAL FEATURES
Automatic/manual change of measurement ranges
AC voltage measurement for sources with low internal impedance (LoZ)
True RMS
Relative measurement mode
Recording MAX/MIN values
Automatic shutdown
Low battery indicator
Freeze the last reading
Analog bargraph: 31 segments (number of measurements: 10/s)
Automatic LCD backlight
Flashlight
Maximum reading: 6000

GENERAL FEATURES
Power supply: 9V battery (6F22/6LR61)
Display size: 66 x 51 mm
Number of measurements: 3/s
Product dimensions: 206.5 x 95.5 x 61 mm
Product weight: 450 g
Accessories: battery, test leads, case