Talent Receiver Axxent Intercom TR100
- The TR100 serves to contact the talent from an intercom station or allows monitoring program signal, where a full size intercom belt pack with headset is not needed or intended. The user may hear commands for calls to the stage or the intercom signal.
- The talent receiver uses the same 3 pin xlr connector as any partyline component and a 3.5 mm (1/8th”) monaural/binaural jack for connection to any earpiece or headphone.
- A miniature Neutrik steel case houses a full power headphone amplifier that allows operation of any conventional earpiece or headphone from 8 ohms up to 600 ohms. Volume is independent of headphone impedance. A durable steel belt clip is a worthy feature.
- Volume is controlled via a rotary potentiometer. If necessary, minimum volume may be adjusted to -40 dB level by an internal jumper. This feature prevents missing a call from the intercom. To access the jumper, two screws of the xlr connector need to be removed.
- The TR100 Talent Receiver is powered by any axxent intercom component with the necessary dc voltage. Because it uses standard partyline intercom principle, it may also be used with components of other intercom manufacturers.
Specifications
Frequency range: | 80.…8.000 Hz |
THD | <1% |
Earphone level | 70 mW max. |
Headphone impedance | 8...600 Ohm |
Power requirement | +24.…30 VDC |
Current consumption | <15 mA idle, <100 mA max. |
Bridging impedance | 200 kOhms |
Connectors | Input xlr 3-pin, female, output 3.5 mm jack |
Dimensions | 89x34x33 mm (LxWxH) |
No posts found
Shipping
We ship Worldwide by Hellenic Post
Delivery time is 5-10 days, for Europe, 10-25 days, Worldwide.
The delivery cost is 25,00 EUR up to 2kg by post.
130,00 EUR up to 200kg by Truck. (only for Europe)